Pp Material Electroplating Chemical Filter For Electroplating Gold Liquid Treatment

Features of Electroplating Chemical PP Material Filter:

As ABS or hardware electroplating production lines require very high precision and high quality for filtering equipment. Especially for acid copper and nickel processes, our latest filter series SPF is a special filter for acid and nickel processes. It uses an integrated filter barrel and a pump with a cooling system. It can be combined with an intelligent control system to ensure the best filtering effect, and to ensure that there is no leakage of chemicals. Have CE/EMC certificate support.

Even if 10kg toner is added, it will not block. The flow rate can still reach 20-30m3/h. The entire process of toner processing only takes 1-2 minutes, and then the liquid can be recycled without leakage.
You can choose to configure an intelligent control system, with high-pressure alarm and low-pressure alarm, maintain your filter through data, monitor pressure and flow in real time, and remind you to clean or replace the filter material in time, saving water and electricity while saving time and effort. It not only improves the filtering effect, but also achieves the best electroplating quality.
After replacing the filter element or filter paper with this filter, it only takes 10 to 20 seconds to release air.
Use configuration protection switch or buckle switch.

Intelligent Control System For Filter System:

PP material chemical filter cartridge media industrial water filtering unit for electroplating

Real-time monitoring of the aging flow, pressure and operation of the filter.
The number of flow cycles can be set according to the process, and automatic warning and shutdown alarms when the cycle running flow is insufficient.
Precise filter cleaning and replacement time.
All high and low pressure, pump water shortages are detected in time and automatically cut off.
The PLC of the main line can be connected via 485 communication.